I’ve been stuck to this model for almost two months, I dont know why but it took me so long to finish this, and yet it was not the best I’ve ever done colors are pretty basic, nothing special, black white yellow some red and green so let’s get started.
Images:
Virtue, the bulky actually this is a fully painted kit, I even repaint the white parts,.
CLICK HER FOR MORE,.
Yoa, once again after months of nothing, here breaking the silence, just a little work in progress and some stuff I think I should show,.
Images:
this the current kit I’m working on as you can see, the Aegis, but actually I was planning to topcoat two other kits but then it rains so I’d just skip doing those,.
CLICK HERE FOR MORE
Yoa, finally I’m done with my first UC kit, this is a special model for me since this is Char’s personal custom unit so let’s start this. I really have nothing to say than that, btw all the parts we’re colored redish pink or something like that so other than the redish pink you can see in the whole body everything is painted, black maroon, light pink(mono eye), red and light gray,.
the lighting wasn’t the best because SOMEONE FORCED ME TO DO THE PICTORIAL EVEN WITHOUT GOOD LIGHT OUTSIDE! but the paint job is acceptable, lot easier since this is a FG 1/144 kit more parts are sepatated than the NG 1/144.
CLICK HERE FOR MORE!
Yoa, another month passed with nothing new, so here the new kit I’m working on, just to break the silence here^_^,.
Images:
so far the only spray painted parts was the knee joints(light gray),
close up of the leg,.
back of the lower leg,.
the head unit with lots of mess, I’m doing this in purpose, letting the paint to dry then scrape the excess paint gives better result for me than the brush alone,.
the typical Zaku II tube,.
the thruster,.
the riffle with wrong paint, it should be light gray.
the hand plain and simple,.
elbow joint, I sand it down both sides to avoid paint scraping,.
paint,. bla bla blah,.
my color guide,.
back of the shield, boring eh?
Well that’s it for this time, I feel sleepy so yeah, thanks for dropping bye,.
It’s been a long time since my last post, like always because of some personal stuff I need to deal with, so what do we’ve got here? well I’ve been working on my FG Virtue for more than a month now, I even been able to finish the Savior first before the Virtue which I started earlier than the Savior(this guy just need some good sunlight for photo shoot), talking too much, here are the images:
The backpack where the two cannons are attached, I’m still fixing some details here,
CLICK DOWN HERE!!
What’s up guys, ive been absent for a month now because of summer class, and a storm in my country which keep me from having a photo shoot of the models I need to upload. I already have 3 kits to post just waiting for the sun to shine,.
This is just a random picture from my computer, and it’s my computer
Do you ever wonder if ants getting sick in their life time?
My first official Gundam 00 model that i worked on, I dont know what to say^_^,.
Images:
Before
After,.
CLICK HERE FOR MORE
Yoa, it’s me Katsune Shinsengumi here with an update after weeks of absence. So what’s new here? Just take a look,.
Images:
1/144 NG Savior Gundam Work in progress
CLICK UNDER HERE FOR MORE
Yoa, this is just an update for my Exia which is almost done, just finishing the chest because the GN-Drive was so hard to hand brush same as the chest, other than that all the parts are done ready for topcoat,.
Images:
the right arm connected to the chest piece,.
CLICK HERE FOR MORE
Its been a month since my last post, I’ve been busy since the last month because of some school stuff so for this post, it will be my most complicated build, the most detailed leg I’ve ever build in my 1/144 NG lines.
Images:
The original unpainted kit
and this is the finished product,.
CLICK HERE FOR MORE Images
What’s up everyone after long week of no update, here is the cake. My first fully painted model kit, the 1/144 NG Blitz, I can say that I improve a little bit since the fist kit I build and so far its getting better and better, no doubt about it.
Images:
The front view,.
CLICK HERE FOR MORE IMAGES!!!
Yoa, its me here Katsune Shinsengumi, this time I’m going to start working with my FG 1/144 Exia, yeah that’s right, its my first time to paint a first grade model since most of my kits are NG 1/144(well I’m not ashamed of it, I’m a beginner^_^ lol!!) . I’m excited about this though its not a MG^_^,.
images:
the parts, a little bit more than the 1/144 NGs with moving elbows and knees^_^(I cant wait),.
HEY!! CLICK HERE FOR MORE DOWN HERE!!!!!!
Finally i was able to continue my red frame since its the start of the holiday, so what’s up with the Astray? almost done just need some few parts to be painted like the chest and shield,.
images:
bla bla bla,. Continue reading
Yoa, what’s up everyone, its been months since my last update i or maybe 3 weeks, ive been busy about my school related stuff and personal life, im a student after all, and at this point im almost done with the Astray Gundam, just few details on the body and it’s ready for topcoat,. + i got new monitor, im not going to upload it here since this is just all about model kits but you can check my facebook account to see more stuff about me that is not related to gundam, my facebook name is Katsune Shadowsight, you better check it out if your not busy. ^_^,.
What’s up people, i already started working on the Gundam Astray, and so far its getting good, than my first handbrushing nightmare with the Duel Gundam, but i broke the VfinT_T,.
images:
the first problem the broken Vfin, i already fix it but im not sure if that was durable enough,.
second problem, as you can see here, the leg(dont mind the mistakes its still in the process if detailing^_^) has a darker shade of red than the torso in the right, so it means i also need to paint all the molded red parts even its already red because its not in the same shade as the legs,.
so far this is all what ive done,. paint all the parts that are supposed to be red,.
this is not part of the Gundam Astray, this is from the Blitz Gundam im done with the model it self, its just this part is so hard to do that even force me to use masking tape even its just hand brushing,.
thats it for these update,. its now time for me to continue the Astray,.
Whats up everyone, its been a long time since my last post here, and now, an update about my next model kit build, and its the NG 1/144 Gundam Astray from Gundam Seed Astray. Im almost done with the Blitz, just painting the shield and im done, so to make use of my spare time, im going to start this red beast,.
Images:
yeah, i believe this is going to be the easiest build based on how it looks out of the box
one of the most unique design, maybe thats the reason why the red, green, and blue frame astrays are in the market to day(or maybe Im wrong^_^)
im really looking forward to build this and most likely is going to be a hand brush build,
well thats it guys, im still in school and have alot of work to do other than school stuff, plus this model kits which is really overwhelming, but time consuming too, checking my blog once a day wont hurt your time schedule, just to know if i have new contents, thanks,.
Whats up everyone we have a new update to the 1/144 NG blitz gundam and i repaint the dark gray to black to make it look better, at least in my eyes, so this is a 100% fully painted build,
images:
the feet almost complete just one color to add,.
this is how i mask my kit, and this is why model kits with more curves than edges are hard to build, you cant bend the masking tape when masking curves, you need to mask it piece by piece,(but this is not the only way to mask model kits^_^ its just my way,.)
Here it is finally, after days of workload and personal stuff, the 1/144 NG Freedom Gundam
Images:
The unpainted version with stickers in the eyes, chin chest, and the red peace in the forehead,.
and these is the the finished product,.
Hey you! Click down here for more,.
Whats up, its me again KatsuneShinsengumi for the last WIP post of my freedom gundam, because probably the next is the show off of the complete model kit, im going to paint these tomorrow morning and see how it will turn out,.
here are some images:
here is the side of the wing,
and here is the shield, just need to be painted black in those gray parts
some minor details in the side skirt cannon,
the legs almost done just the black part to be painted,
the back of the torso and stuff,.
one of the best chest design i saw
the finished product that act as my paint job guide
and finally the back shot,
so thats it for these, update, it took me about 4 days to mask these because of some personal stuff to finish first, and after these, i can start the blitz gundam and avenge the result of the duel, i might repaint the duel because it really was a horrible result, though I learn alot from the process of it,.
Yoa, these is another update about the work in progress of Freedom Gundam, just showing off my current work,
images:
the beam riffle
shield almost done, just the black paint for the gray parts
the vfin was painted yellow red and white, same as the chin, lower eyes and the eyes, also the vulcans in the side of the head and the vents in the side of the head, and also gray in the cheeks( to much “and”, like a noob english student,..)
close up shot of the beam spammer’s head,
okay, I need to fix the red mess in the white part of the vfin^_^,.(which i already do by the time you see these)
the legs with some panel lines already(still need the black paint)
legs again, with better view of the gray paints in the joint and the leg thrusters
the feet, completely finished with panel lines, and my hand,..
and finally the front skirt, and may hand again,
well thats it for this work in progress of Freedom 1/144 NG, awesome Gundam, I really like the design of Freedom,(I wish it is the new perfect grade, and not the Ftrike Freedom^_^) Im planning to get a master grade of these when ever i have some chance to,.
Yoa,. its me Katsune Shinsengumi, and I already decided what modelkit should I build, since Im already done with, strike, aegis, duel and the buster, i think its time to do my Blitz, I already have these for about 2 years, standing in my table, so now lets polish it, and make it a real deal model kit,
here are some images out of the box:
parts after being cut from the trees
semi side view,(like a professional wannabe) do i look like a wannabe? no, yea, no,
Whats up everyone, we have another review tonight, and these is about the Buster as the title said, my fist kit with top coat, really satisfied with it,.
these is how it looks like snap built out of the box before
and now, side view looks great
awesome look for a 1/144 no grade eh,.
MORE HERE!! CLICK DOWN HERE!
Hey guys,. these is just the head, almost done, just showing some details, i use the eye sticker because i like the metallic finished of it, since I dont have metallic paints yet, here are some images:
im very satisfied
it looks sharp, i might get a 1/100 scale^_^,.
you see that eye? thats the eye of a walking fortress made to devastate in a long range ship oriented battle,.
well thats it for now, im very satisfied with the result, it makes ma want to cry,. (lol!!! im not going to do that seriously),.
Yoa, its been a while since my last update, so for now, here is 1/144 NG buster gundam work in progress, some painting and preparation of the model, im not going to do a hand brush again for a full painting,. handbrush from now on is only for minor details.
Lets go to the images:
Here are the parts almost prepared for the masking and painting,. Continue reading
Yoa, so what do we have here now? The 1/144 NG Duel Gundam, color out of the box is all white in legs, arms, lower torso and head, blue feet, shield,beam riffle, upper torso and upper head and yellow V-fin, here i will just show some of the making pictures and final model result, these is also my first build using a Mr. Hobby, I do both hand brush with spray paint(the dark blue parts) and honestly, the handbrushing was a nightmare, the only part i use it handy was in the eyes, other than that, i think i’ll better stay in spray paint^_^,. i still i will practice hand brush to my very best, so lets start these, here are some images:
the head, the mr. hobby acrylic was really handy in eyes, and also the chin,
CLICK HERE FOR MORE IMAGES OF MY WORST BUILD,.T_T
Another post from nowhere, just giving you guys a teaser for the next review, the 1/144 NG launcher strike, I wasnt been able to post my masking and spray painting tutorial because my monitor died and i have no choice but to use the laptop as my last backup, the problem is the images for the tutorial were in my desktop, so these is it for now, the main review review cant be done today because I broke the left leg peg and its still in curing time for now,.
Some images taken from the Morgenroete before the zaft attack(lo!!)
Another images from the same event
last image few minutes before the zaft forces start the raid assult(^_^ lol)
So thats it for these update lets just see what will happen next.,
alright, these day is really special, i mean really special, why? i was supposed to do a tutorial about spray paint painting and masking + doing a review of 1/144 no grade launcher strike, and what happen, i break the peg of the launcher strike ‘s left legs so what now? it really ruins my bright schedule, like a cold rainy day, you go out with thick heater type jacket, and suddenly the sun rise up 90 degrees in the sky and you look like an idiot wearing jacket in the middle of the heat, I mean why now? im just one sleep closer to the day of my review and these is what happen? well, what’s done is done, i will just deal with it and lets see what will really happen next,.
okay, for the next week expect another seed line model 1/144 scale no grade since i still have a lot of no grades to finish, before my 1/100 and other stuff. and also probably a tutorial about masking and spray can painting.
These model kit is a purely pinkish red mold out of the box so except for the pinkish red a lot of painting is needed to get these done,
First here are the images :
right side view
CLICK HERE FOR MORE IMAGES,.
Yoa, im still working for these site so probably the real update will be in next week when the paint is already shipped in mail, at these point im just like a kid learning abcd and screwing my self in 123, lol!!
